PVC Paste Resin Supplier & Manufacturer Malaysia
Kaneka Paste Polymers PVC Paste is from two sophisticated manufacturing process. Kaneka supplying micro-suspension grade that has excellent latex stability & particle size control and emulsion grade that achieved fast polymerization rate to accommodate the diverse demands of the market. Kaneka constantly invest R&D and technical support to provide one-stop business development solution to meet customer needs.
Skin
Foam
Application
Grade
PVC Paste Grades
| Grade | PSH-25 | PSH-31 | PSM-31 | PSM-30 | PSM-72E | PSL-31 | PSL-75 | EM-31 | EL-31 | EL-231 | EL-33 | EM-235 | |
| K-Value | 80 | 77 | 72 | 72 | 72 | 66 | 66 | 72 | 68 | 68 | 66 | 70 | |
| Type | MICRO-SUSPENSION PROCESS | EMULSION PROCESS | |||||||||||
| Brookfield Viscosity (V20) | |||||||||||||
| mPa.S *3) | 3,000 | 3,000 | 3,500 | 13,000 | 3,000 | 3,000 | 3,500 | 4,500 | 8,000 | 40,000 | 7,500 | *5) | |
| Volatile Content (%) | MAX 0.8 | ||||||||||||
| Characteristic | Good Air Release | ○ | ○ | ○ | ○ | ● | ○ | ||||||
| Fast Gelation | ● | ● | ● | ● | ● | ● | ● | ||||||
| Good Physical Properties | ● | ● | ○ | ○ | ○ | ● | |||||||
| High Clarity | ● | ○ | ○ | ||||||||||
| Low Water Take-up | ● | ||||||||||||
| Low Fogging | ● | ○ | ○ | ● | ○ | ● | |||||||
| Good Electrical Resist | ● | ||||||||||||
| Good Foamability | ○ | ○ | ● | ● | ○ | ● | ● | ● | ● | ||||
| High Blowing Ratio | ○ | ○ | ○ | ● | ● | ● | |||||||
| Matt Surface | ○ | ||||||||||||
| Thixotropy Rheology | ○ | ● | ● | ||||||||||
| Good Plasticizer Absorption | |||||||||||||
| Application | Gloves (Disposable) | ○ | ● | ○ | ● | ○ | |||||||
| Gloves (Working/Supported) | ○ | ||||||||||||
| Artificial Leather (Top/Skin) | ● | ● | ○ | ○ | ○ | ||||||||
| Artificial Leather (Foam) | ○ | ○ | ● | ● | ● | ● | ● | ● | ● | ||||
| Toys | ○ | ● | ● | ● | |||||||||
| Wall Covering | ○ | ○ | ○ | ● | ● | ● | ● | ● | |||||
| Flooring Covering (Top/Skin) | ● | ● | ○ | ○ | ○ | ○ | |||||||
| Flooring Covering (Foam) | ○ | ○ | ● | ● | ● | ● | ● | ● | ● | ||||
| Carpet Backing | ● | ● | ○ | ● | ○ | ● | ○ | ||||||
| Cap Seal | ○ | ○ | |||||||||||
| Sealant / Adhesive | ○ | ○ | |||||||||||
| Under Body Coating (UBC) | ○ | ○ | |||||||||||
● Recommended
○ Feasible
*3) Paste PVC is typical values measured and recorded in accordance with JIS K7383 and K7117-1
*4) Unmeasurable (100phr polymer resin , 60phr DOP). 3,500mPa.s (100phr polymer resin, 160phr DOP)
*5) Unmeasurable (100phr polymer resin , 60phr DOP). 6,800mPa.s (100phr polymer resin, 150phr DOP